Questions and answers

The expert of our project answers, Natalya Kaplunova Cement-bonded particleboards have a rather large weight and format and high density, they are difficult to saw, so you should not consider them as very cheap house cladding. In addition, it is desirable to glue the grid and plaster or paint on top.

Read More

The expert of our project responds, Natalya Kaplunova. The tree does not tolerate excessive moisture. So when cleaning you should not take a large amount of water and plenty of detergents. It is better to wipe the stairs soaked in a weak solution, preferably a neutral detergent and then a well-wrung cloth. If you need to clean the unpainted wooden stairs well, then you can wet a small area with hot soapy water, wipe it well with a tough brush, rinse it with water and wipe dry with a thick sacking cloth.

Read More

The expert of our project answers, Natalya Kaplunova. Construction debris that arises after repair cannot be disposed of as household into ordinary garbage bins installed by public utilities. Although some management companies enter into contracts with a special farm, so that tenants can take out large-sized garbage once a week or two, which will be perfectly legal.

Read More

The expert of our project answers, Natalya Kaplunova Levkass on plaster and it is possible, and necessary, if it is really necessary to achieve a smooth surface. For many types of finishes, this condition is necessary to obtain a good result. “Naked” plaster can give the surface some defects such as height differences or cracks, it has great adhesion and is “sharp” for thin wallpapers.

Read More

The expert of our project, Svetlana Olishevets, answers. If you need to glue the fabric to the plastic (or vice versa) pointwise, then a glue gun will do (it is also called a “thermogun”). The principle of operation is quite simple: a small glue stick (“cartridge”) “charges” into the gun, which, when turned on, starts to warm up.

Read More

The expert of our project, Svetlana Olishevets, answers. The total cost of installing an attic staircase consists of the following costs: the cost of the attic staircase itself (it ranges from several thousand to several tens of thousands of rubles depending on the material, shape and size of the stairs), the cost of fixing the stairs in the left for her doorway in the attic floor - depends on the model of the stairs, and also on whether you will do it yourself (for example, with an assistant), that is, practically free of charge, or hire for this professionals.

Read More

The expert of our project, Svetlana Olishevets, answers. Start by counting the money you can afford to spend on repairs. Your expenses will consist of the following main types of costs: dismantling the old tile or other flooring, as well as the existing wall decoration (this can be done independently, that is absolutely free), the cost of a new ceramic tile and special "corners" to it, the cost of special glue , payment for laying tile.

Read More

The expert of our project, Alexey Yuryev, answers. First of all, it is necessary to say about the diameter of the pipes. Standard diameters that are used in HDD are 63, 110, 160, 225, 315, 400, 500, 600, 700 and 800 mm. Regulatory technical documentation (SNiP 3.05.04-85, TPR-901-09-9.87) establishes that for pipelines that have a diameter of over 273 mm, spiral-seam and or longitudinal welded pipes are used.

Read More

The expert of our project, Alexey Yuryev, answers. The standard plastic window consists of PVC profile, double-glazed window and accessories. All three of these elements must have the maximum quality so that the windows themselves can be called quality with confidence. To determine the quality of PVC profile, you must pay attention to the number of chambers in the profile (this element affects the insulating characteristics) and on the walls of the profile, which affect the mechanical properties of windows.

Read More

The expert of our project answers, Alexey Yuryev It should be said right away that tiles for the floor and for the walls are different types of tiles. For floors, tile is usually used, which has a thickness of 10-12 mm. Wall tile thinner - 7-9 mm. When buying any kind of tile, you should ask the seller if this tile is suitable for laying in the bathroom.

Read More

The expert of our project answers, Natalya Kaplunova Polystyrene foam plates are effective as insulation, since they have a low coefficient of thermal conductivity. The low weight of the plates simplifies installation, and it doesn’t make the wall itself too heavy. This material is easily processed, while extruded is more elastic, so that it is more convenient to work with it.

Read More

How to wash stretch ceilings from PVC? How to clean the fabric? How to remove stains? Answers in the article. Stretch ceilings give a lot: great views, practicality (hiding communications, protection from flooding), durability, quick installation ... Instead, they only require skillful care, which will allow you to enjoy an impeccable aesthetic look for much longer.

Read More

The expert of our project answers, Natalya Kaplunova Thermal insulation and sound insulation of balconies should be conducted from all sides, including walls, floor and ceiling. Naturally, it is necessary to choose the right glazing, which should also have these properties, and not only protect from the weather. The most warm and quiet is considered to be a balcony with glazed frames that have double glazing.

Read More

The expert of our project answers, Natalya Kaplunova The coupler on the wooden floor is different from the fill on the other base. The wooden base has completely different characteristics than stone, which must be considered. Since the wooden floor is prone to deformations, so the concrete screed should not cling so tightly to the tree to prevent its natural movement, otherwise it will not avoid the appearance of cracks.

Read More

The expert of our project answers, Natalya Kaplunova. Facing bricks can be of different types according to the material from which it is made and the method of production, which affects its properties. It may be different in design: a familiar facing brick with different textures was added to a familiar brick with a perfectly smooth surface.

Read More

The expert of our project responds, Natalya Kaplunova. The processing of aluminum depends on the thickness of the sheet and the large amount of work. So if you work a little, the material is not too thick, then you can do with hand tools. But if even with thin aluminum it is necessary to perform a large number of cuts or to conduct similar work regularly, then it makes sense to purchase more serious equipment.

Read More

The expert of our project, Evgeny Ivanov, answers. A puncher, like any other power tool, can have breakdowns and malfunctions from time to time. Today I will tell you which ones are the most frequent and how to prevent them in time. The whole design of the punch can be divided into electrical and mechanical parts.

Read More